Heat Shield
Heat Shield
Click to enlarge image(s)

heat shield

 

WHY USE HEATSHIELD:

  • Car Stays cooler.

Absolutely.  We’ve measured a temperature difference of as much as 40˚ F (25˚ C.), but you will feel an average temperature reduction in your car of about 25˚ F.

  • Fits right!

We’re serious about accuracy.  Our computer-driven cutting machines are capable of producing exact HeatShields for virtually every car, truck and van.

  • No fasteners.

HeatShield is designed to be supported with the car’s sunvisors alone.  No Velcro, no suction cups, or anything else!

  • Easy to use.

Unroll across dash, lift HeatShield and drop sunvisors.  For storage, roll up and secure with special Velcro strap. 

HeatShield install instructions:

  • Unroll HeatShield across dash.
  • Lift HeatShield against glass.
  • Lower sunvisors for support.

HeatShield is stiff enough to be supported by the sunvisors alone, but it is flexible enough to be bent around the rearview mirror.

HeatShield are simple to use, but just as easy to store!

  • Lift sunvisors and pull HeatShield down.
  • Roll up from end to end.
  • Wrap the attached Velcro strap around the roll.

HeatShield is light and flexible, so storage is quick and easy. But it also has a memory to be flat, so it quickly unrolls out flat for each use.

 

STEP 1: Unroll HeatShield across dash.
 Make sure HeatShield
is centered in windshield and placed
as far down where glass meets dash.


STEP 2: Tuck HeatShield behind
rearview mirror, if mounted on
windshield.
 It is okay to bend HeatShield.

STEP 3: Lift HeatShield against glass.
Adjust HeatShield in windshield,
may overlap slightly with side
windshield frame (A-pillars) and headliner.
STEP 4: Lower sunvisors for support
HOME PAGE
7960 Soquel Dr Suite B414
Aptos Ca 95003 
Toll Free 1-800-707-7072
Phone 831-476-4352
Copyright 2002-2015


Email: info@1uab.com


sheepskinoutlet is Upfront